Securplumb CP CXC Isolating Valve 22mm

Securplumb Chrome-Plated CxC Isolating Valve – 22mm

Product Overview:

The Securplumb CP CxC Isolating Valve 22mm is a high-quality, full-bore shut-off valve designed to provide reliable water isolation in 22mm copper plumbing systems. Manufactured from durable brass and finished in polished chrome for enhanced corrosion resistance and visual appeal, this isolating valve is ideal for both domestic and light commercial applications.

With copper-to-copper (CxC) connections, it is perfectly suited for integration into standard 22mm pipework using solder or compression fittings. The valve includes a simple quarter-turn flathead screwdriver slot for quick and effective shut-off, enabling easy maintenance or emergency repairs without the need to isolate the entire system.

Product Specifications:

• Product Type: Chrome-Plated Isolating Valve

• Connection Size: 22mm (CxC – Copper to Copper)

• Material: Solid brass construction

• Finish: Chrome plated

• Control Mechanism: Flathead screwdriver slot, quarter-turn operation

• Boxed Weight: 150g

• Application: Hot and cold water systems, heating circuits

• Operating Pressure: Suitable for typical domestic pressures

• Installation Type: Solder fit (or compression with compatible fittings)

Key Features:

• Reliable Isolation: Allows quick shut-off for system maintenance or appliance replacement

• Copper-to-Copper Fit: Designed for soldered connections, ensuring a leak-proof, permanent installation

• Sleek Chrome Finish: Corrosion-resistant and visually appealing for exposed pipework

• Quarter-Turn Operation: Flathead slot allows fast isolation using a standard screwdriver

• Full Bore Design: Promotes efficient flow with minimal restriction

• Compact Form Factor: Ideal for use in tight or concealed installations

Typical Applications:

• Domestic hot and cold water pipework

• Central heating systems

• Bathroom and kitchen installations

• Isolating sections of pipework for repair or upgrade

• Appliance connections (e.g., boilers, cylinders, tanks)

Installation Guidelines:

1. Turn Off Water Supply: Ensure water is fully shut off and the pipe is drained.

2. Cut and Prepare Pipe: Clean and deburr both ends of the 22mm copper pipe.

3. Fit the Valve: Position the valve in-line and apply flux to the pipe and valve ends.

4. Solder the Joints: Heat the joints evenly until solder flows to seal the connection.

5. Cool and Clean: Allow to cool, then wipe clean to remove any flux residue.

6. Test the System: Restore water supply and check for leaks and valve operation.

Note: Always follow local plumbing regulations. Installation should be performed by a qualified plumber where required.

Care and Maintenance:

• Operate Regularly: Turn the isolating slot occasionally to prevent sticking or seizing

• Inspect Annually: Check for signs of corrosion or leaks, especially in hard water areas

• Keep Accessible: Ensure the valve is not obstructed to allow easy access in emergencies

Frequently Asked Questions (FAQ):

Q1: Can this valve be used with compression fittings instead of soldering?
Yes, with compatible adapters, though it is primarily designed for soldered (end feed) installations.

Q2: Is it suitable for both hot and cold water?
Yes, this valve is compatible with hot and cold water systems, including central heating circuits.

Q3: How is the valve operated?
The valve features a flathead screwdriver slot, allowing for simple quarter-turn operation.

Q4: Is it suitable for outdoor use?
While the chrome finish provides good corrosion resistance, outdoor installations should be protected or housed.

Conclusion:

The Securplumb CP CxC Isolating Valve 22mm is a dependable, sleek solution for isolating 22mm copper pipework in both new installations and system upgrades. Its durable chrome-plated body, easy-to-use quarter-turn mechanism, and solid copper connections make it a practical choice for plumbers and installers prioritizing functionality, safety, and professional finish.