Polycell Smoothover Damaged Wall

Polycell SmoothOver for Damaged & Textured Walls is the ultimate solution for transforming rough, uneven, or damaged wall surfaces into a smooth, paint-ready finish. Specially formulated with a self-levelling compound, this filler is designed to effortlessly fill cracks, dents, ridges, and textured areas such as artex. Ideal for both professional decorators and DIY users, it provides a flawless surface with minimal effort, creating the perfect base for painting or wallpapering.

Whether you're working on a single room or an entire property, this product helps restore walls to a professional standard with a smooth, consistent finish.

Key Features:

1. Self-Levelling Formula:
   Smoothly fills uneven textures, cracks, and damaged areas without extensive sanding.
2. Ideal for Textured Walls & Artex:
   Covers ridges and bumps effectively for a flat, smooth finish.
3. Ready to Paint:
   Once dry, the surface is immediately suitable for painting or decorating.
4. Time-Saving Application:
   Easy to apply with a smoothing blade or trowel, reducing preparation time.
5. Low Shrinkage:
   The formulation dries with minimal shrinkage, ensuring long-lasting results.
6. Professional Finish:
   Leaves walls looking newly plastered, ideal for renovation and redecoration.

Product Variants:

1. Polycell SmoothOver Damaged/Textured Walls – 2.5L

• Boxed Weight: 3.0 kg
• Coverage: Approx. 5m² depending on wall texture and thickness applied
• Ideal for: Medium repair jobs or small room renovations

2. Polycell SmoothOver Damaged/Textured Walls – 5L

• Boxed Weight: 5.5 kg
• Coverage: Approx. 10m² depending on wall texture and thickness applied
• Ideal for: Larger surface areas or multiple-room projects

Application Instructions:

• Surface Preparation:
  Ensure walls are dry, dust-free, and free from loose material. Scrape off any peeling paint or loose texture.
• Apply the Product:
  Use a Polycell SmoothOver Tool Set or wide smoothing blade to spread the product evenly across the wall.
• Level the Surface:
  Apply in thin layers using firm strokes. The self-levelling formula will smooth itself across ridges and uneven areas.
• Dry Time:
  Allow to dry completely (typically 12–24 hours depending on layer thickness and temperature).
• Optional Sanding:
  Lightly sand with fine-grade sandpaper if a glass-smooth finish is desired.
• Paint or Decorate:
  Once dry and clean, paint directly over or apply wallcoverings.

Recommended For:

• Covering rough plaster or artex
• Smoothing cracked or damaged internal walls
• Prepping surfaces before redecoration
• Home renovations or rental property refreshes

Frequently Asked Questions (FAQ):

Q1: Can I use this over old wallpaper or paint?
A: No, it's best to remove wallpaper and flaking paint to ensure proper adhesion.

Q2: Do I need to prime the wall before applying?
A: No primer is needed; just ensure the surface is clean, dry, and stable.

Q3: How thick can I apply SmoothOver?
A: It can be applied in layers up to 4mm. For deeper areas, apply in stages.

Q4: Do I need to sand after it dries?
A: Not always. The finish is smooth enough for painting, but light sanding can improve the surface further if needed.

Q5: Is this suitable for ceilings?
A: Yes, it can be used on ceilings, though additional care may be needed during application.

Warranty Information:

Polycell SmoothOver products are manufactured to high quality standards. This product is covered by a 12-month manufacturer’s warranty against material defects. Warranty claims require valid proof of purchase and may require product return for inspection. This does not affect your statutory rights.

Conclusion:

With its easy application, advanced self-levelling properties, and excellent coverage, Polycell SmoothOver for Damaged & Textured Walls is the professional choice for wall restoration. Whether you're preparing to decorate or simply want to refresh old surfaces, this product ensures a clean, even finish every time.